GE Vivid 7 - Back-End Processor (BEP) Outputs

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5 - 97
5-4-9 Back-End Processor (BEP) Outputs
Table 5-67 Output Signals
Signal Name Description Signal Path
+5VDC DC Voltage PC2IO > IIO
+12VDC DC Voltage PC2IO > IIO
PS_ON* Active Low PC2IO > IIO > Card Cage
Standby PC2IO > IIO > Top Console
SVideo SVideo Out PCVIC > PC2IO > IIO > EIO
CVideo Composite Color Video PCVIC > PC2IO > IIO > EIO
VGA VGA High Resolution Video to External Video Screen PCVIC > PC2IO > IIO > EIO
VGA
VGA High Resolution Video to Internal Video Screen (Top
Console)
BEP > Top Console
BW Video RGB
BW Video from RGB.
This signal is not used on Vivid 7
PCVIC > PC2IO > IIO > EIO
This signal is not used on Vivid 7
Audio Out Audio Out from BEP
BEP > IIO > Internal VCR
BEP > IIO > EIO > External VCR
TRIG Video Trig Signal PC2IO > IIO > EIO