GE Vivid 7 - Restore Standard Printer IP and Port Settings - Software Version V2.X

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
8 - 78 Section 8-9 - Software Loading Procedure - Software Version v2.x
8-9-16 Restore Standard Printer IP and Port Settings - Software Version v2.x (cont’d)
5.) Select Printer.
6.) Select Properties.
7.) Select Standard TCP\IP Port.
8.) Select Configure Port.
Figure 8-75 Properties
Figure 8-76 Configure Port
Printer
Properties
Standard TCP\IP Port.
Configure Port