GE Vivid 7 - Set the Scanners Network Information - Software Version V3.X

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 91
3-10-5 Set the Scanner’s Network Information - Software Version v3.x
In the IP settings area of the screen, enter the;
1.) IP Address for scanner. (Default IP Address from factory: 10.0.0.3).
2.) Subnet Mask for scanner. (Default Subnet Masks from factory: 255.255.255.0).
3.) IP address for Default Gateway. (Default Gateways from factory IP address: 0.0.0.0).
4.) In addition, the AE Title for the scanner must be entered in the DICOM server’s setup.
.
Figure 3-94 TCP/IP Set-up for Vivid 7
IP Address
Subnet Mask
Default Gateway
AETitle
Port Number