GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
4 - 74 Section 4-3 - Functional Checks
4-3-20 Peripheral Checks
4-3-20-1 Video Printers Checks
There may be both a black & white video printer and a color video printer on-board the system.
The Video Printers are controlled from the PRINT
and ALT. keys on the scanner’s Operator Panel. The
factory default is PRINT
for the B/W Video Printer and ALT. for the Color Video Printer.
4-3-20-2 DVR Checks
Please see chapter 5 in the Vivid 7 Peripherals Installation Manual, Part Number: FC294048 revision 3
(or newer).
Figure 4-39 Freeze, Print 1 and Print 2 keys on the Operator Panel
Table 4-36 Video Printer(s) Checks
Step Task Expected Result(s)
1.
When scanning in 2D Color Mode, Press FREEZE
to
stop image acquisition.
Image scanning stops with the last picture on the
screen.
2.
Press PRINT
on the Operator Panel
The image displayed on the screen is printed on B&W
or Color printer, depending on the key assignment
configuration.
3.
Press ALT
. on the Operator Panel
The image displayed on the screen is printed on Color
or B&W printer, depending on the key assignment
configuration
4.
Check if the print quality on the pictures both from the
printers are of expected quality.
PRINT key
ALT. key
FREEZE key
To Next Page
Loading...
