GE Vivid 7 - Feps Location in the Unit; Input Signals; Bidirectional Signals; Output Signals

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
5 - 8 Section 5-3 - a Front-End Processor (FEP)
5-3-4 FEP’s Location in the Unit
5-3-5 Input Signals
• RX signals from probes
• Physio (ECG/Phono)
5-3-6 Bidirectional Signals
PC2IP bus to BEP
5-3-7 Output Signals
• TX signals to probe
• Doppler and Color Flow Data to Back-End Processor for digital signal processing
• Digital Video Data to Back-End Processor
5-3-8 Fuses, Jumpers, Dip-switches and LEDs
See descriptions for each card.
Figure 5-4 Front-End Processor’s Location
FRONT-END PROCESSOR / FRONT-END CARD CAGE