GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 112 Section 3-11 - Connectivity Setup - Software v2.x
3-11-5 Set the Scanner’s Network Information - Software Version v2.x
In the IP settings area of the screen, enter the;
• IP Address for scanner. (Default IP Address from factory: 10.0.0.3).
• Subnet Mask for scanner. (Default Subnet Mask from factory: 255.255.255).
• IP address for Default Gateway. (Default Subnet Mask from factory: 0.0.0.0).
NOTE: For software v2.x, the Port Number has been set to 104. It can not be adjusted.
.
Figure 3-119 TCP/IP Set-up for Vivid 7
IP Address
Subnet Mask
Default Gateway
To Next Page
Loading...
