GE Vivid 7 - Kits; Service Kits

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 9 - Renewal Parts 9 - 99
Section 9-30
Kits
9-30-1 Service Kits
Table 9-77 Service Kits, Overview
Item PART NAME
PART
NUMBER DESCRIPTION QTY FRU
1 BUMPER KIT FROGLEG FC200086
BUMPER KIT, FROGLEG
1Y
2 COLUMN COVER SET FC200088 1 Y
3 KNOB KIT 2188902-8
ROUND KNOBS ON OPERATOR PANEL
1Y
4
UNIVERSAL KNOB KIT FOR LOGIQ9/
VIVID7
2384216
THIS KIT HAS BEEN REPLACED BY THE KIT 5114700 &
5115063 (SEE BELOW)
THIS KIT CONTAINS;
- 5 SLIDE POT KNOBS,
- 2 SMALL KNOBS,
- 3 LARGE, DOMED KNOBS,
- 4 GAIN CONTROL KNOBS (L9 ONLY) AND
- 2 LARGE DISHED KNOBS (V7 ONLY)
1 Y
5
UNIVERSAL KNOB KIT FOR L9-V7
Improved
5114700 1 Y
6
KNOBS, SLIDE POT KNOB, KIT OF 10
FOR LOGIQ 9/ VIVID 7
5115063
THIS KIT CONTAINS TEN (10X) KNOBS
1 Y
8 VIVID 7 RING OF KEYS FRU KIT FC200484
This part is located inside the Operator Panel and is a vital
part of the buttons around the trackball
1Y
10 WHEEL CHANGE KIT FC200829 1 Y
11 SHIM KIT FOR LOGIQ9 OP PANEL 5116529
CONTENT IN SHIM KIT (Can be used for VIVID 7 too)
• 2 x Shim Washer 0.635 mm thick
• 1 x Shim Washer 1mm thick
1Y
BEVEL EDGED BOARD
WOODEN WEDGE