GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 45
3-9-5 Changing the Computer Name, AE Title and/or Port Number (Port No.)
NOTE: To change the AE Title and/or Port No., please refer to: 3-9-5-3 "Change AE Title and/or Port
Number (Port No.)" on page 3-47.
3-9-5-1 Before you change the Computer Name
Move all images to remote media before you change the Computer Name. See: 4-2-15 "Space
Management" on page 4-20, or refer to the User Manual, for a detailed description.
3-9-5-2 Change the Computer Name
.
1.) When in the Tcpip screen, select Modify. This will bring up a Warning, see the illustration below.
2.) Select Ok to continue or Cancel if you don’t want to change the Computer Name.
If you selected Ok, the Computer Name will be editable.
NOTICE
If possible, do not change the Computer Name. If you change the Computer Name, you will loose
the access to all images in the Local Archive (on the internal hard disk drive). If you must change the
Computer Name, please refer to 3-9-5 "Changing the Computer Name, AE Title and/or Port Number
(Port No.)" on page 3-45.
Figure 3-32 Select Modify
Figure 3-33 Warning
MODIFY
To Next Page
Loading...
