GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 46 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
3-9-5-2 Change the Computer Name (cont’d)
3.) Edit the Computer Name.
4.) Select Save settings to store your changes. This will bring up a new Warning screen.
5.) Select Ok to save your changes or Cancel to return without saving any changes.
6.) Reboot Vivid 7 to activate the settings or continue with other Tcpip set-up tasks.
Figure 3-34 Edit Computer Name
Figure 3-35 Warning
EDIT THE
COMPUTER NAME
To Next Page
Loading...
