GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 5 - Components and Functions (Theory) 5 - 133
5-11-3 DC Power
5-11-3-1 General Description
• The DC Power module is a switch mode power supply, enclosed in a metal frame that slides into
the Card Cage.
• The module connects to the Motherboard (Backplane) through two F48 pin male connectors (P3
and P4) and supplies DC voltage via the Backplane, to all the boards in the Front End Card Cage
(FEP), to the I/O and to the Operator Panel.
5-11-3-2 Location in the Unit
Figure 5-87 DC Power - Location in the Unit
Front of Scanner
DC Power Supply
To Next Page
Loading...
