GE Vivid 7 - Formatting Removable Media - Software Version V3.X and above

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 4 - Functional Checks 4 - 17
4-2-7 Formatting Removable Media - Software Version v3.x and above
This procedure describes how to format an MO disk or a CD-R disc.
NOTE: CD-RW discs are NOT supported by Vivid 7, but CD-R discs may be used.
Before you continue, be sure about what naming convention you will use for labelling the Removable
Media.
1.) Select Config > Connectivity > Tools
2.) Select the removable media from the Media drop-down menu.
3.) Enter a name for the removable media in the Label field.
4.) Press Format.
5.) Wait for the display of the Information window indicating that the formatting process is completed.
NOTE: Do not eject the CD using the button on the CD drive
6.) Press ALT+E to display the Eject Device menu.
NOTE: Depending on the software version, the color on the menus may vary. Depending on available
Removable Media, the number of choices in the menu will vary.
7.) Select the relevant media. The selected media is ejected.
Figure 4-13 The Tools screen
Figure 4-14 Eject Device menu
MEDIA DROP-DOWN MENU
LABEL
FORMAT