GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
4 - 8 Section 4-2 - General Procedures
4-2-3 Power Shut Down (cont’d)
Standby
NOTE: The Standby mode is only supported by units with software version v2.x and v3.x.
Use this button to select the Standby mode, allowing a shorter reboot time. Most of the system is
powered down, but a certain portion of the unit remains energized. The standby mode allows a shorter
reboot time when the system is used on a daily basis or moved from one place to another.
See 4-2-3-1 "Standby Mode" on page 4-10 for more info about the use of Standby.
To Next Page
Loading...
