GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
3 - 48 Section 3-9 - Connectivity Setup - Software v7.x (BT’08), v6.x, v5.x and v4.x
3-9-6 Set the Scanner’s Network Information - S/W v4.2/v5.2/v6.1/v7.x and later
NOTE: For software version v4.0/v4.1/v5.0/v5.1/v6.0, see: 3-9-7 "Set the Scanner’s Network
Information - S/W v4.0/v4.1/v5.0/v5.1/v6.0" on page 3-50
.
1.) When in the Tcpip (TCP/IP) screen, select Advanced Settings to display the Network
Connections screen.
2.) Right-click Local Area Connection and select Properties from the pop-up menu. This will display
the Local Area Connection Properties screen.
Figure 3-38 Select Advanced Settings
Figure 3-39 Network Connections screen
ADVANCED SETTINGS
To Next Page
