GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 3 - System Setup 3 - 127
3-11-10-6 Set-up of DICOM Server in Vivid 7’s Configuration Screens - Software v2.x
1.) From the Name pull-down menu select DICOMSERVER.
2.) Enter the IP address of the DICOM server in the IP Address field.
3.) Select the Pure DICOM Storage line under Services and the bottom part of the screen will be
populated with set-up information for the DICOM server.
Figure 3-134 Select DICOM Server
Figure 3-135 Set DICOM Server’s IP Address
DICOM Server’s IP
Address
DICOM Server’s IP
Address
To Next Page
Loading...
