GE Vivid 7 - Page 382

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
5 - 36 Section 5-3 - a Front-End Processor (FEP)
5-3-15-9 LEDs on BF64, Part Number: FC200100
Figure 5-26 LEDs on BF64, P/N FC200100
Table 5-28 LEDs on BF-64 Boards, P/N FC200100
LED # LED COLOR DESCRIPTION NORMAL STATE
LD2
- Red
“ERROR”. Board not initialized or an
error has occurred
Normally OFF
LD1
- Green
“OK”. Board tested OK by System. Normally ON
LD3
- Yellow
Not Used Normally OFF
LD4
- Yellow
Not Used Normally OFF
LD5
- Red
“POWER ERROR”.
+5V and/or +2.5V is missing
Normally OFF
LD6
- Yellow
Merger status indicator Blinking
LD7
- Yellow
Merger status indicator Blinking
LD5
LD4
LD3
LD1
LD2
PLUG USED BY MANUFACTORING
LD7
LD6