GE Vivid 7 - Page 43

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 1 - Introduction 1 - 5
NOTE: When not otherwise specified, the contents in this manual applies to all Vivid 7 models.
FC000340
VIVID 7 PRO (BT’03), 100 - 120 VAC
FEP1
(RFT)
BEP2 v3.1/v3.3
FC000330
VIVID 7 PRO (BT’03), 220 - 240 VAC
FC000320
VIVID 7 (BT’03), 100 - 120 VAC
FC000310
VIVID 7 (BT’03), 220 - 240 VAC
FC000210
VIVID 7 (BT’02), 100 - 120 VAC
- Manufactured
with either BEP1
or BEP2.
- BEP2 may be
used as FRU
- BEP2 phased
into production
from September
2002.
v2.3/v2.4
FC000200
VIVID 7 (BT’02), 220 - 240 VAC
FC000190
VIVID 7 PRO (BT’02), 100 - 120 VAC
FC000180
VIVID 7 PRO (BT’02), 220 - 240 VAC
FC000060
VIVID 7 (BT’01), 100 - 120 VAC
- Manufactured
with
BEP1
- BEP2 may be
used as FRU
FC000030
VIVID 7 (BT’01), 230 VAC
Table 1-3 Vivid 7 Models and Hardware/Software Compatibility (cont’d) sheet 3 of 3
MODEL
NUMBER
DESCRIPTION
FRONT-END
PROCESSOR
BACK-END
PROCESSOR
APPLICATION
SOFTWARE
VERSION(S)