GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 6 - Service Adjustments 6 - 5
6-6-4-2 Adjust Brightness
The factory default Brightness settings:
• BT03/04/05/06 units: Brightness = 32%
• BT02 units: Brightness = 40%
Follow the steps below to adjust the monitor’s brightness setting:
1.) Press the Left button on the display monitor twice (see Figure 6-1 "Adjust Contrast and Brightness"
on page 6-4).
2.) Press the Right button to increase brightness.
3.) Press the Center button to decrease brightness.
The amount of brightness is shown on a slider on the screen (see Figure 6-1 "Adjust Contrast and
Brightness" on page 6-4).
To Next Page
Loading...
