GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
7 - 50 Section 7-7 - Common Diagnostics
7-7-1-1 Disruptive Mode
Disruptive Mode utility is used to enable/disable Disruptive Mode.
Disruptive Mode must be used if a remote computer is used to control Vivid 7. Example: InSite.
7-7-1-2 System Shutdown
Intended for use from remote computer. See: "System Shutdown" on page 7-43.
Figure 7-53 Common Diagnostics - Utilities - Disruptive Mode Utility
To Next Page
Loading...
