GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
7 - 58 Section 7-7 - Common Diagnostics
7-7-3-2 Audio Test
1.) Double-click Audio Test from the PC Diagnostic interactive tests menu.
2.) To test the WAV sound reproduction select Left Channel, Right Channel, or Both Channels to test
your speakers. You should hear a guitar chord.
3.) To test MIDI sound reproduction select the button under MIDI. You should hear a few seconds of
recorded music.
4.) Select the Beep button. You should hear a low “beep” from your Back-End Processor. (It may be
difficult to hear due to noise from the fan.
If no sound is produced in these tests, choose the More Info button in the Audio Test dialog box for
information about possible causes and solutions.
Figure 7-61 Sound Tests
To Next Page
Loading...
