GE Vivid 7 - Page 603

GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
Chapter 8 - Replacement Procedures 8 - 15
8-7-6 Move Images - Software Version v7.x/v6.x/v5.x/v4.x
For general information, please refer to the Disk management description in the Vivid 7 User Manual.
8-7-6-1 Configure the Disk Management Function
NOTE: Configuration of the Disk management system can only be done by user with administration
rights.
1.)
Press Config (F2).
2.) Log on as ADM (administrator).
- Password, software v6.x and later: ulsadm
- Password, software v5.x and earlier: notthing (leave empty).
NOTE: If the passwords above don’t function, please ask the customer for the correct password.
3.) Select the category Admin.
4.) In the Admin category, select the Disk Management tab.
8-7-6-2 Disk Management Schedule Setting
• Next to Reminder interval, specify the number of days/weeks you want the system to prompt you
to perform disk management.
This setting should be set based on the activity of your office/institution. If None is selected, no
reminder will be displayed.
Figure 8-9 Disk Management
1. Sets the reminder time interval for running Disk management.
2. Sets the files to be managed based on the examination dates.
3. Sets the Disk management to copy, move or delete images.
4. Sets the destination device.