GE HEALTHCARE
DIRECTION FC091194, REVISION 11 VIVID 7 SERVICE MANUAL
8 - 20 Section 8-7 - Software Loading Procedure - Software Version v7.x, v6.x, v5.x and v4.x
8-7-8 Record SW Option Keys - Software Version v7.x/v6.x/v5.x/v4.x
1.) Press CONFIG (F2) and log on as adm, see 4-2-4 "Log On to the System as ‘ADM’" on page 4-12.
2.) Select Admin from the lower part of the screen.
3.) Select the System Admin tab.
4.) Record the SW Options Key(s) - alphanumeric string - from the SW Options Key window.
Figure 8-17 System Admin
WARNINGWARNING
Make sure that the SW Option Keys (passwords) have been recorded correctly. If the
key is incorrect, you will not be able to log on after the SW installation has been
completed. The password is case sensitive. Hyphens must also be recorded. There may
be more than one password.
Table 8-5 SW Options Keys - Software Version v7.x/v6.x/v5.x/v4.x
SW OPTIONS KEYS
To Next Page
Loading...
