Configuring the Terminal
3-25
3
Bar Code Symbologies Table (continued)
Parameter (Syntax) Options Location in Configuration Menu
Code 49 (continued)
• Function Code 2 (CL)
\x0D\x0A (CR LF)
Any four ASCII characters
• Function Code 3 (CM)
None (disabled)
Any two ASCII characters
Code 93 (CF)
Disabled
Enabled
Symbologies Menu,
Code 93 option
Code 128 (CH)
Disabled
Standard
UCC/EAN-128
ISBT
Symbologies Menu,
Code 128 option
• ISBT symbology
Disabled
Enabled
• ISBT concatenated
Disabled
Enabled
Interleaved 2 of 5 (CA)
Disabled
Fixed length
Variable length, no check digit
Case Code, check digit
Variable length, check digit
Symbologies Menu,
2 of 5, I2 of 5 option
MSI (CN)
Disabled
No check digit
1 modulus 10 check digits
2 modulus 10 check digits
Symbologies Menu,
MSI option
• Check digits
Discard
Retain
Symbologies Menu,
MSI option
Plessey (CI)
Disabled
Discard check digit
Retain check digit
Symbologies Menu,
Plessey option
UPC/EAN (CE)
Symbologies Menu,
UPC/EAN option
• UPC-A/EAN-13
(Version A)
Disabled
Enabled
UPC-A only
• UPC-E (Version E)
Disabled
Enabled
• EAN-8
Disabled
Enabled
• Supplementals
Yes
No
To Next Page
Loading...
