Intermec Antares 2420 - Page 129

Configuring the Terminal
3-27
3
RF Network Communications Table (T2425 Only) (continued)
Parameter (Syntax) Options Location in Configuration Menu
Network Loopback (NL)
Disabled
Enabled
Communications Menu,
Advanced Network option
Network Port (NG)
00023 (for TCP/IP)
05555 (for UDP Plus)
1 – 65535
Communications Menu,
Advanced Network option
RF Domain (RW)
0
0 – 15
Communications Menu,
Radio option
RF Inactivity Timeout (RY)
5 seconds
0 - 255 seconds
Communications Menu,
Radio option
RF Roaming Flag (RR)
Allowed
Not allowed
Communications Menu,
Radio option
RF Security ID (RS)
None (no characters)
Any 20 ASCII characters
Communications Menu,
Radio option
RF Transmit Mode (RT)
BFSK
QFSK
Auto
Communications Menu,
Radio option
RF Wakeup On Broadcast (RB)
No
Yes
Communications Menu,
Radio option
Subnet Mask (NS)
255.255.255.0
The Subnet Mask field is four
numbers separated by periods.
Communications Menu,
Advanced Network option
TCP/IP Maximum Transmit
Timeout (NH)
0 (No timeout)
0 - 128 seconds
20 seconds
Communications Menu,
Advanced Network option
Terminal IP Address (ND)
0.0.0.0
The IP address field is four
numbers separated by periods.
Communications Menu,
Primary Network option