Intermec Antares 2420 - Page 182

TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
N
ugg
Co de 39
5-10
TRAKKER Antares FileCopy Utility Dialog Box
4. Check the serial port and serial communications parameters to verify that the settings
for your PC match the values that are set for the terminal’s serial port.
a. Select the COM Port Setup tab to verify and configure the PC serial port
parameters.
b. Select the Serial Communications Setup tab to verify and configure the PC serial
communications parameters.
c. Use the TRAKKER Antares 2400 Menu System to configure the serial port
parameters on the terminal. For help, see “Configuring the Serial Port
Parameters” in Chapter 1.
5. Make sure that the terminal is running an application that will not be updated during
the file transfer. If you are in the TRAKKER Antares 2400 Menu System, exit the
menu system.
You can run
APPTSK.BIN
application while transferring files. For help, see
“Running the Application on the Terminal” later in this chapter.
6. Select the FileCopy tab to download or upload applications and files.
a. In the PC filename and path field, type the path and filename (
FILENAME.
EXE
or
FILENAME.
BIN
) for the file on your PC. You can select a previously used
filename from a list by clicking on the down arrow.
To view a list of available files on your PC, click the Browse button.