Co de 39
Nugget
Configuration Command Reference
9-59
9
Acceptable values for
data
are:
0 No flow control
1 CTS checking
2 XON/XOFF response
3 XON/XOFF control
4 XON/XOFF response and control
5 CTS/RTS for DTE-DTE
Default: No flow control
Scan: To set the default flow control for each serial port, scan one of these bar codes:
No Flow Control for COM1 No Flow Control for COM3
*$+YL1.0* *$+YL3.0*
*$+YL1.0* *$+YL3.0*
No Flow Control for COM4
*$+YL4.0*
*$+YL4.0*
Or: To set the flow control for one serial port:
1. Scan this bar code:
Enter Accumulate Mode / Set Flow Control
*+/$+YL*
*+/$+YL*
2. Scan one of these bar codes to set the COM port:
COM1 COM3
*1.* *3.*
*1.* *3.*
COM4
*4.*
*4.*
To Next Page
Loading...
