Co de 39
Nugget
Configuration Command Reference
9-119
9
Default: 1111111
First digit:
UPC-A/EAN-13 enabled
Second digit:
UPC-E enabled
Third digit:
EAN-8 enabled
Fourth digit:
Supplementals allowed
Fifth digit:
Transmit check digit
Sixth digit:
Transmit number system digit
Seventh digit:
Retain leading zero for UPC-A
Scan: To disable UPC/EAN, scan this bar code:
Disable UPC/EAN
*$+CE0000000*
*$+CE0000000*
Or: To enable UPC/EAN:
1. Scan this bar code:
Enter Accumulate Mode / Enable UPC/EAN
*+/$+CE*
*+/$+CE*
2. Scan one of these bar codes to set the first digit:
Disable UPC/EAN-13 Enable UPC/EAN-13
*0* *1*
*0* *1*
Enable UPC-A Only
*2*
*2*
3. Scan one of these bar codes to set the second digit:
Disable UPC-E Enable UPC-E
*0* *1*
*0* *1*
4. Scan one of these bar codes to set the third digit:
Disable EAN-8 Enable EAN-8
*0* *1*
*0* *1*
To Next Page
Loading...
