TRAKKER Antares 2420 and 2425 Hand-Held Terminal User’s Manual
Co de 39
Nugget
9-120
UPC/EAN (continued)
5. Scan one of these bar codes to set the fourth digit:
Supplementals Not Allowed Supplementals Allowed
*0* *1*
*0* *1*
6. (Optional) Scan one of these bar codes to set the fifth digit:
Discard Check Digit Transmit Check Digit
*0* *1*
*0* *1*
7. (Optional) Scan one of these bar codes to set the sixth digit:
Discard Number System Digit Transmit Number System Digit
*0* *1*
*0* *1*
Note: If you discard the number system digit, one leading digit is discarded from
UPC-A, UPC-E, and EAN-8, and two leading digits are discarded from EAN-13.
8. (Optional) Scan one of these bar codes to set the seventh digit:
Discard Leading Zero for UPC-A Transmit Leading Zero for UPC-A
*0* *1*
*0* *1*
Note: This option applies only when you enable UPC-A/EAN-13.
9. Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*
To Next Page
Loading...
