Keysight Technologies 6811C

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 105
OUTPut:DFI
This command enables or disables the discrete fault indicator (DFI) signal to the
ac source.
OUTPut:DFI:SOURce
This command selects the source for DFI events. The choices are as follows:
– QUEStionable: Questionable summary bit
– OPERation: Operation summary bit
– ESB: Standard Event summary bit
– RQS: Request Service summary bit
– OFF: Never true
Command syntax OUTPut:DFI[:STATe] <bool>
Parameters 0 | 1 | OFF | ON
*RST value OFF
Examples
OUTP:DFI 1 OUTP:DFI ON
Query syntax OUTPut:DFI[:STATe]?
Returned parameters 0 | 1
Related commands OUTP:DFI:SOUR
Command syntax OUTPut:DFI:SOURce <source>
Parameters QUEStionable | OPERation | ESB | RQS | OFF
*RST value OFF
Examples
OUTP:DFI:SOUR OPER
Query syntax OUTPut:DFI:SOURce?
Returned parameters <CRD>
Related commands OUTP:DFI