Keysight Technologies 6811C Programming Guide

3 Language Dictionary
194 Keysight Models 6811C, 6812C, and 6813C Programming Guide
Trace Subsystem Commands
This subsystem programs the output waveform of the ac source. Two waveform
commands are available: TRACe and DATA. These commands are
interchangeable; they both perform the same function.
Subsystem syntax
TRACe:CATalog?
DATA:CATalog?
These queries return a list of defined waveform names. The list includes both
pre-defined waveforms such as SINusoid, SQUare, and CSINusoid, as well as any
user-defined waveforms.
TRACe | DATA
:CATalog? Return list of defined waveforms
[:DATA] <waveform_name>, <n>{, <n>} Assign values to a waveform
:DEFine <waveform_name>[, <waveform_name> | 1024] Create and name new waveform
:DELete
[:NAME] <waveform_name> Delete waveform to free its memory
Query syntax TRACe:CATalog?
DATA:CATalog?
Parameters None
Examples
TRAC:CAT? DATA:CAT?
Returned parameters <SRD>
Related commands TRAC TRAC:DEL FUNC:SHAP

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English