Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 183
SYSTem:COMMunicate:LAN:IPADdress
Assigns a static Internet Protocol (IP) address for the ac source. If DHCP is
enabled (SYSTem:COMMunicate:LAN:DHCP ON), the specified static IP address is
not used. Contact your LAN administrator for details.
SYSTem:SECurity:IMMediate sets this parameter to its default value. For the
query form, specify “CURRent” (default) to read the value currently being used by
the instrument. Specify “STATic” to read the value currently stored in nonvolatile
memory within the instrument (may not be the actual address used by the
instrument if DHCP is enabled). This setting is non-volatile; it is not changed by
power cycling, *RST, or SYSTem:PRESet. This parameter is set to its default value
when the instrument is shipped from the factory and after
SYSTem:SECurity:IMMediate.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to
activate the new setting.
Command syntax SYSTem:COMMunicate:LAN:IPADdress <quoted_address>
Parameters <quoted_address>
Examples
SYST:COMM:LAN:IPAD “192.168.10.1”
Query syntax SYSTem:COMMunicate:LAN:IPADdress? [mode]
Parameters [CURRent | STATic] (Default: CURRent)
Examples
SYSTem:COMMunicate:LAN:IPAD?
SYSTem:COMMunicate:LAN:IPAD? STAT
Returned parameters <SRD>

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English