3 Language Dictionary
110 Keysight Models 6811C, 6812C, and 6813C Programming Guide
OUTPut:TTLTrg:SOURce
This command selects the signal source for the Trig Out signal as follows:
– BOT: Beginning of transient output
– EOT: End of transient output
– LIST: Specified by the TTLTrg list
When an event becomes true at the selected TTLTrg source, a pulse is sent to the
BNC connector on the rear of the ac source.
Command syntax OUTPut:TTLTrg:SOURce <source>
Parameters BOT | EOT | LIST
*RST value BOT
Examples
OUTP:TTLT:SOUR LIST
Query syntax OUTPut:TTLTrg:SOURce?
Returned parameters <CRD>
Related commands OUTP:TTLT
To Next Page
Loading...
