Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 205
TRIGger:SEQuence1:DEFine
TRIGger:SEQuence2:DEFine
TRIGger:SEQuence3:DEFine
These commands define the names that are aliased to trigger sequences 1, 2 and
3. The command accepts only TRANsient for sequence 1, SYNChronize for
sequence 2, and ACQuire for sequence 3 as predefined names. The query allows
the user to query the instrument names aliased to sequences 1, 2, and 3.
Command syntax TRIGger:SEQuence1:DEFine TRANsient
TRIGger:SEQuence2:DEFine SYNChronize
TRIGger:SEQuence3:DEFine ACQuire
Parameters TRANsient, SYNChronize, ACQuire
Examples
TRIG:SEQ1:DEF TRAN TRIG:SEQ3:DEF ACQ
Query syntax TRIGger:SEQuence1:DEFine?
TRIGger:SEQuence2:DEFine?
TRIGger:SEQuence3:DEFine?
Returned parameters <CRD>
To Next Page
Loading...
