Programming Examples 5
Keysight Models 6811C, 6812C, and 6813C Programming Guide 263
Questionable Status Group
The Questionable Status registers record signals that indicate abnormal operation
of the ac source. As shown in the Figure 5-5, the group consists of the same type
of registers as the Status Operation group.
The outputs of the Questionable Status group are logically-ORed into the
QUEStionable summary bit (3) of the Status Byte register.
Register Command Description
Condition STAT:QUES:COND? A register that holds real-time status of the circuits being
monitored. It is a read-only register.
PTR filter STAT:QUES:PTR <n> A positive transition filter that functions as described under
STAT:QUES:NTR|PTR commands in Chapter 3, "Language
Dictionary". It is a read/write register.
NTR filter STAT:QUES:NTR <n> A negative transition filter that functions as described under
STAT:QUES:NTR|PTR commands in Chapter 3, "Language
Dictionary". It is a read/write register.
Event STAT:QUES:EVEN? A register that latches any condition that is passed through
the PTR or NTR filters. It is a read-only register that is
cleared when read.
Enable STAT:QUES:ENAB? <n> A register that functions as a mask for enabling specific bits
from the Event register. It is a read/write register.
To Next Page
Loading...
Need help?
General
