3 Language Dictionary
128 Keysight Models 6811C, 6812C, and 6813C Programming Guide
FM:DEViation
Keysight 6811C/6812C/6813C Option 020 only.
Sets the peak frequency deviation of the output frequency modulation in hertz.
The frequency deviation must be less than the programmed output frequency by
at least 0.001 Hz. For example, if the output frequency is set to 60 Hz, and you
program a deviation of 10 Hz, the output frequency will modulate between 50 and
70 Hz at a rate determined by the FM:FREQuency command.
FM:FREQuency
Keysight 6811C/6812C/6813C Option 020 only.
Sets the modulating frequency of the output frequency modulation in hertz.
Command syntax [SOURce:]FM:DEViation <NRf>
Parameters 0 to 1000
Unit Hz (hertz)
*RST value 0
Examples
FM:DEV 10
Query syntax [SOURce:]FM:DEViation?
Returned parameters <NR3>
Related commands FM FM:FREQ
Command syntax [SOURce:]FM:FREQuency <NRf>
Parameters 0.001 to 1000
Unit Hz (hertz)
*RST value 0.1
Examples
FM:FREQ 1
Query syntax [SOURce:]FM:FREQuency?
Returned parameters <NR3>
Related commands FM FM:DEV
To Next Page
Loading...
Need help?
General
