3 Language Dictionary
138 Keysight Models 6811C, 6812C, and 6813C Programming Guide
LIST:FREQuency
This command sets the sequence of frequency list points. The frequency points
are given in the command parameters, which are separated by commas. The order
in which the points are entered determines the sequence in which they are output
when a list is triggered. Changing list data while a subsystem is in list mode
generates an implied ABORt.
LIST:FREQuency:POINts?
This query returns the number of points specified in LIST:FREQuency. Note that it
returns only the total number of points, not the point values.
Command syntax [SOURce:]LIST:FREQuency[:LEVel] <NRf+>{, <NRf+>}
Parameters MINimum | MAXimum |
0.001 to 1000 (6811C/6812C/6813C except Option 019)
0.001 to 100 (6813C Option 019)
Unit Hz (hertz)
Examples
LIST:FREQ 55, 60, 65
Query syntax [SOURce:]LIST:FREQuency[:LEVel]?
Returned parameters <NR3>{, <NR3>}
Related commands LIST:FREQ:POIN? LIST:COUN LIST:DWEL LIST:STEP
Query syntax [SOURce:]LIST:FREQuency:POINts?
Returned parameters <NR1>
Examples
LIST:FREQ:POIN?
Related commands LIST:FREQ
To Next Page
Loading...
Need help?
General
