Keysight Technologies 6811C Programming Guide

3 Language Dictionary
182 Keysight Models 6811C, 6812C, and 6813C Programming Guide
SYSTem:COMMunicate:LAN:HOSTname
Assigns a hostname to the ac source. A hostname is the host portion of the
domain name, which is translated into an IP address. If Dynamic Domain Name
System (Dynamic DNS) is available on your network and your instrument uses
DHCP, the hostname is registered with the Dynamic DNS service at power-on. If
DHCP is enabled (SYSTem:COMMunicate:LAN:DHCP ON), the DHCP server can
change the specified hostname.
If no hostname exists, a null string (“”) is returned. For the query form, specify
“CURRent” (default) to read the value currently being used by the instrument.
Specify “STATic” to read the host name currently stored in nonvolatile memory
within the instrument (may not be the actual name used by the instrument if
DHCP is enabled). This setting is non-volatile; it is not changed by power cycling,
*RST, or SYSTem:PRESet. This parameter is set to its default value when the
instrument is shipped from the factory and after SYSTem:SECurity:IMMediate.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to
activate the new setting.
Command syntax SYSTem:COMMunicate:LAN:HOSTname <quoted_string>
Parameters <quoted_string>
Examples
SYST:COMM:LAN:HOST “LAB-ACS”
Query syntax SYSTem:COMMunicate:LAN:HOSTname? [mode]
Parameters [CURRent | STATic] (Default: CURRent)
Examples
SYSTem:COMMunicate:LAN:HOST?
SYSTem:COMMunicate:LAN:HOST? STAT
Returned parameters <SRD>

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English