Keysight Technologies 6811C Programming Guide

3 Language Dictionary
158 Keysight Models 6811C, 6812C, and 6813C Programming Guide
VOLTage:MODE
This command determines how the AC rms output voltage is controlled during a
triggered output transient. The choices are as follows:
– FIXed: The voltage is unaffected by a triggered output transient.
– STEP: The voltage is programmed to the value set by VOLTage:TRIGgered
when a triggered transient occurs.
– PULSe: The voltage is changed to the value set by VOLTage:TRIGgered for a
duration determined by the pulse commands.
– LIST: The voltage is controlled by the voltage list when a triggered transient
occurs.
Command syntax [SOURce:]VOLTage:MODE <mode>
Parameters FIXed | STEP | PULSe | LIST
*RST value FIXed
Examples
VOLT:MODE FIX VOLT:MODE:LIST
Query syntax [SOURce:]VOLTage:MODE?
Returned parameters <CRD>
Related commands VOLT VOLT:TRIG

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English