Keysight Technologies 6811C Programming Guide

3 Language Dictionary
144 Keysight Models 6811C, 6812C, and 6813C Programming Guide
LIST:VOLTage:POINts?
This query returns the number of points specified in LIST:VOLTage. Note that it
returns only the total number of points, not the point values.
LIST:VOLTage:SLEW
This command specifies the output voltage slew list points. The slew points are
given in the command parameters, which are separated by commas. The order in
which the points are entered determines the sequence in which they are output
when a list is triggered. Changing list data while a subsystem is in list mode
generates an implied ABORt.
LIST:VOLTage:SLEW:POINts?
This query returns the number of points specified in LIST:VOLTage:SLEW. Note
that it returns only the total number of points, not the point values.
Query syntax [SOURce:]LIST:VOLTage[:LEVel]:POINts?
Returned parameters <NR1>
Examples
LIST:VOLT:POIN?
Related commands LIST:VOLT
Command syntax [SOURce:]LIST:VOLTage:SLEW <NRf+> | INF {, <NRf+> | INF}
Parameters 0 to 9.9E37 | MAXimum | MINimum | INFinity
Unit V (volts per second)
Examples
LIST:VOLT:SLEW 10, 20, 1E2
Query syntax [SOURce:]LIST:VOLTage:SLEW?
Returned parameters <NR3>{, <NR3>}
Related commands LIST:VOLT:SLEW:POIN? LIST:COUN LIST:DWEL LIST:STEP
Query syntax [SOURce:]LIST:VOLTage:SLEW:POINts?
Returned parameters <NR1>
Examples
LIST:VOLT:SLEW:POIN?
Related commands LIST:VOLT:SLEW

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English