Keysight Technologies 6811C Programming Guide

3 Language Dictionary
212 Keysight Models 6811C, 6812C, and 6813C Programming Guide
*PSC
This command controls the automatic clearing at power-on of the Service
Request Enable and the Standard Event Status enable registers as follows (refer
to “Programming the Status Registers” on page 259 in Chapter 5, "Programming
Examples" for the register details):
– 1 or ON: Prevents the register contents from being saved, causing them to be
cleared at power-on. This prevents a PON event from clearing SRQ at
power-on.
– 0 or OFF: Saves the contents of the Service Request Enable and the Standard
Event Status enable registers in non-volatile memory and recalls them at
power-on. This allows a PON event to generate SRQ at power-on.
The query returns the current state of *PSC.
Command syntax *PSC <bool>
Parameters 0 | 1 | OFF | ON
Examples
*PSC 0 *PSC 1
Query syntax *PSC?
Returned parameters 0 | 1
Related commands *ESE *SRE

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English