Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 145
LIST:VOLTage:OFFSet
This command specifies the DC offset points in a list. The offset points are given in
the command parameters, which are separated by commas. The order in which
the points are entered determines the sequence in which they are output when a
list is triggered. Changing list data while a subsystem is in list mode generates an
implied ABORt.
The maximum peak voltage that the ac source can output is 425 V
peak
. This
includes any combination of voltage, voltage offset, and function shape values.
Therefore, the maximum value that can be programmed depends on the
peak-to-rms ratio of the selected waveform. For a sine wave, the maximum
voltage that can be programmed is 300 V
rms
.
LIST:VOLTage:OFFSet:POINts?
This query returns the number of points specified in LIST:VOLTage:OFFSet. Note
that it returns only the total number of points, not the point values.
Command syntax [SOURce:]LIST:VOLTage:OFFSet <NRf+>{, <NRf+>}
Parameters –425 to +425 | MAXimum | MINimum
Unit V (DC voltage)
Examples
LIST:VOLT:OFFS 50, 75, 100
Query syntax [SOURce:]LIST:VOLTage:OFFSet?
Returned parameters <NR3>{, <NR3>}
Related commands LIST:VOLT:OFFS:POIN? LIST:COUN LIST:DWEL LIST:STEP
LIST:VOLT:SLEW
Query syntax [SOURce:]LIST:VOLTage:OFFSet:POINts?
Returned parameters <NR1>
Examples
LIST:VOLT:OFFS:POIN?
Related commands LIST:VOLT:OFFS

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English