Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 177
SECurity[:IMMediate]
Sanitizes all user-accessible instrument memory except for the calibration
constants and reboots the instrument. This feature clears all user-defined state
information, measurement data, and user defined I/O settings such as the IP
address. This feature is not recommended for use in routine applications because
of the possibility of unintended data loss. The command is typically used before
removing an instrument from a secure area. Increments the security count.
SYSTem:COMMunicate:LAN:CONTrol?
Reads the initial control connection port number for the communication of
sockets. This connection is used to send and receive commands and queries. Use
the control-socket connection to send a Device Clear (DCL) to the instrument or
to detect pending SRQ events.
SYSTem
:VERSion? Returns the SCPI version number
:LOCal Go to local mode
:REMote Go to remote mode
:RWLock Go to remote with lockout mode
Command syntax SECurity[:IMMediate]
Parameters None
Examples
SEC SEC:IMM
Related commands SYST:SEC:IMM
Query syntax SYSTem:COMMunicate:LAN:CONTrol?
Parameters None
Examples
SYST:COMM:LAN:CONT?
Returned parameters <NR1>
Related commands SYST:COMM:TCP:CONT
To Next Page
Loading...
Need help?
General
