Keysight Technologies 6811C Programming Guide

3 Language Dictionary
80 Keysight Models 6811C, 6812C, and 6813C Programming Guide
MEASure:ARRay:CURRent:HARMonic?
FETCh:ARRay:CURRent:HARMonic?
These queries return an array of harmonic amplitudes of output current in rms
amperes.
The first value returned is the DC component, the second value is the fundamental
frequency, and so on up to the 50th harmonic. Harmonic orders can be measured
up to the fundamental measurement bandwidth of the measurement system,
which is 12.6 kHz. Thus, the maximum harmonic that can be measured is
dependent on the output frequency. Any harmonics that represent frequencies
greater than 12.6 kHz are returned as 0.
Query syntax MEASure:ARRay:CURRent:HARMonic[:AMPLitude]?
FETCh:ARRay:CURRent:HARMonic[:AMPLitude]?
Parameters None
Examples
MEAS:ARR:CURR:HARM? FETC:ARR:CURR:HARM?
Returned parameters 51 NR3 values
Related commands MEAS:ARR:VOLT:HARM? MEAS:ARR:CURR:HARM:PHAS?

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English