Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 131
FUNCtion:MODE
This command determines how the waveform shape is controlled during a
triggered output transient. The choices are as follows:
– FIXed: The waveform shape is unaffected by a triggered output transient.
– STEP: The waveform shape is programmed to the value set by
FUNCtion:TRIGgered when a triggered transient occurs.
– PULSe: The waveform shape is changed to the value set by
FUNCtion:TRIGgered for a duration determined by the pulse commands.
– LIST: The waveform shape is controlled by the waveform shape list when a
triggered transient occurs.
Command syntax [SOURce:]FUNCtion[:SHAPe]:MODE <mode>
Parameters FIXed | STEP | PULSe | LIST
*RST value FIXed
Examples
FUNC:MODE FIX
Query syntax [SOURce:]FUNCtion[:SHAPe]:MODE?
Returned parameters <CRD>
Related commands FUNC FUNC:TRIG
To Next Page
Loading...
