Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 219
*WAI
This command instructs the ac source not to process any further commands until
all pending operations are completed. Pending operations are complete when:
– All commands sent before *WAI have been executed. This includes overlapped
commands. Most commands are sequential and are completed before the next
command is executed. Overlapped commands are executed in parallel with
other commands. Commands that affect output voltage or state, relays, and
trigger actions are overlapped with subsequent commands sent to the ac
source. The *WAI command prevents subsequent commands from being
executed before any overlapped commands have been completed.
– All triggered actions are completed and the trigger system returns to the Idle
state.
*WAI can be aborted only by sending the ac source a GPIB DCL (Device Clear)
command.
Command syntax *WAI
Parameters None
Related commands *OPC

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English