Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 69
CALibrate:STRing
CALibration:STRing
Stores a message in calibration memory. Common messages include the last
calibration date, calibration due date, or calibration department contact
information. You can perform this query regardless of whether the ac source is
secured. Storing a calibration message overwrites the previous message. This
setting is non-volatile; it will not be changed by power cycling or *RST or
SYSTem:PRESet.
CALibrate:VOLTage:AC
CALibration:VOLTage:AC
This command can only be used in calibration mode. It initiates the calibration of
the AC voltage programming and metering circuits.
Command syntax CALibrate:STRing <quoted_string>
CALibration:STRing <quoted_string>
Parameters <quoted_string>
*RST value OFF
Examples
CAL:STR “CAL BY JOHN [EXT: 1234]”
Query syntax CALibrate:STRing?
CALibration:STRing?
Returned parameters <SRD>
Related commands CAL:DATE
Command syntax CALibrate:VOLTage:AC
CALibration:VOLTage:AC
Parameters None
Examples
CAL:VOLT:AC
Related commands CAL:SAVE CAL:STAT

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English