To Next Page

To Previous Page

3 Language Dictionary

168 Keysight Models 6811C, 6812C, and 6813C Programming Guide

Status Subsystem Commands

This subsystem programs the ac source status registers. The ac source has three

groups of status registers; Operation, Questionable, and Standard Event. The

Standard Event group is programmed with Common commands. The Operation

and Questionable status groups each consist of the following five registers:

–Condition

–Enable

–Event

–NTR Filter

–PTR Filter

Refer to “Programming the Status Registers” on page 259 in Chapter 5,

"Programming Examples" for more information.

Subsystem syntax

STATus

:PRESet Presets all enable and transition registers to power-on

:OPERation

[:EVENt]? Returns the value of the event register

:CONDition? Returns the value of the condition register

:ENABle <n> Enables specific bits in the Event register

:NTRansition <n> Sets the Negative transition filter

:PTRansition <n> Sets the Positive transition filter

:QUEStionable

[:EVENt]? Returns the value of the event register

:CONDition? Returns the value of the condition register

:ENABle <n> Enables specific bits in the Event register

:NTRansition <n> Sets the Negative transition filter

:PTRansition <n> Sets the Positive transition filter

Keysight Technologies 6811C Programming Guide

Other manuals for Keysight Technologies 6811C