Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 143
LIST:TTLTrg:POINts?
This query returns the number of points specified in LIST:TTLT. Note that it returns
only the total number of points, not the point values.
LIST:VOLTage
This command specifies the output voltage points in a list. The voltage points are
given in the command parameters, which are separated by commas. The order in
which the points are entered determines the sequence in which they are output
when a list is triggered. Changing list data while a subsystem is in list mode
generates an implied ABORt.
The maximum peak voltage that the ac source can output is 425 V
peak
. This
includes any combination of voltage, voltage offset, and function shape values.
Therefore, the maximum value that can be programmed depends on the
peak-to-rms ratio of the selected waveform. For a sine wave, the maximum
voltage that can be programmed is 300 V
rms
.
Query syntax [SOURce:]LIST:TTLTrg:POINts?
Returned parameters <NR1>
Examples
LIST:TTLT:POIN?
Related commands LIST:TTLT
Command syntax [SOURce:]LIST:VOLTage[:LEVel] <NRf+>{, <NRf+>}
Parameters For sine waves: 0 to 300 | MAXimum | MINimum
Unit V (rms voltage)
Examples
LIST:VOLT 115, 126, 120 LIST:VOLT MAX, 120, MIN
Query syntax [SOURce:]LIST:VOLTage[:LEVel]?
Returned parameters <NR3>{, <NR3>}
Related commands LIST:VOLT:POIN? LIST:COUN LIST:DWEL LIST:STEP
LIST:VOLT:SLEW LIST:VOLT:OFFS

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English