5 Programming Examples
228 Keysight Models 6811C, 6812C, and 6813C Programming Guide
Introduction
This chapter contains examples on how to program your ac source. Simple
examples show you how to program:
– output functions such as voltage, frequency, and phase
– the transient waveform generator
– internal and external triggers
– measurement functions
– user-defined waveforms
– the status and protection functions
These examples in this chapter are generic SCPI commands. Refer to Chapter 2,
"Introduction to Programming" for information about encoding the commands
as language strings. Where appropriate, optional commands are shown for
clarity in the examples.
To Next Page
Loading...
Need help?
General
