Keysight Technologies 6811C Programming Guide

Language Dictionary 3
Keysight Models 6811C, 6812C, and 6813C Programming Guide 181
SYSTem:COMMunicate:LAN:GATeway
Assigns a default gateway for the ac source. The specified IP Address sets the
default gateway, which allows the instrument to communicate with systems that
are not on the local subnet. Thus, this is the default gateway where packets are
sent that are destined for a device not on the local subnet, as determined by the
Subnet Mask setting. Contact your LAN administrator for details.
– CURRent: returns address currently being used by the instrument.
– STATic: returns static address from non-volatile memory. This address is used
if DHCP is disabled or unavailable.
– SYSTem:SECurity:IMMediate sets this parameter to its default value.
If DHCP is enabled (SYSTem:COMMunicate:LAN:DHCP ON), the specified default
gateway is not used. However, if the DHCP server fails to assign a valid IP
address, the currently configured default gateway is used. This setting is
non-volatile; it is not changed by power cycling, *RST, or SYSTem:PRESet.
If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate to
activate the new setting.
Command syntax SYSTem:COMMunicate:LAN:GATeway <quoted_address>
Parameters <quoted_address>
Examples
SYST:COMM:LAN:GAT “192.168.10.1”
Query syntax SYSTem:COMMunicate:LAN:GATeway? [mode]
Parameters [CURRent | STATic] (Default: CURRent)
Examples
SYSTem:COMMunicate:LAN:GAT?
SYSTem:COMMunicate:LAN:GAT? STAT
Returned parameters <SRD>

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English