4 Keysight Models 6811C, 6812C, and 6813C Programming Guide
Safety Considerations
Read the information below before using this instrument.
The following general safety precautions must be observed during all phases of
operation, service, and repair of this instrument. Failure to comply with these
precautions or with specific warnings elsewhere in this guide violates safety
standards for design, manufacture, and intended use of the instrument. Keysight
Technologies assumes no liability for the customer’s failure to comply with these
requirements.
ENERGY HAZARD. AC sources can supply 425 V peak at their output. DEATH
on contact may result if the output terminals or circuits connected to the
output are touched when power is applied.
RISQUE ÉNERGÉTIQUE. Les sources AC peuvent fournir une tension de sortie
de 425 V maximum. Tout contact peut entraîner la MORT si les circuits ou
bornes de sortie connectés à la sortie sont touchés lorsqu’ils sont sous
tension.
To Next Page
Loading...
Need help?
General
